PR53502 Heat Laminator
NiSCA PR53XX Printer Series Basic Maintenance Video
Play Low Bandwidth Video
Play Med Bandwidth Video
QUICK FACTS:
The PR5302 is delivered with standard factory default setting for the following laminate materials:
Hardcoat (holopatch) material:
- Full 1 mil thickness
- Registered or non-registered (wallpaper)
- Clear and custom holographic effects
- .25 mil thickness
- Registered or non-registered (wallpaper)
- Clear and custom holographic effects
Features of the PR5302 include sensitive position adjustment settings to optimally locate the laminate on the ID card. Temperature and speed settings allow the user to configure the laminator to just the correct setting for their specific laminate to ensure a perfect bond. Additionally, the PR5302 offers a "sleep" mode so the unit does not remain at operating temperature while not in use. This feature saves you money on your electric bill and increases the life of the heatlamp unit.
SPECIFICATIONS:
| Printing system: | Heat transfer printing | |
| Print media: | PVC | |
| Media size: | CR-80 (54x86mm) | |
| Print area: | Entire card surface | |
| Printing speed: | 30sec max | |
| Transfer ribbon: | Team NiSCA protective/holographic material | |
| Communication: | RS422, printer to heat roller | |
| Power source: | ACPower source-AC100/120v 50/60Hz. | |
| ACPower source-AC200/240v 50/60Hz. | ||
| Dimensions: | 400 x 180 x 300mm (h x w x l) | |
| Weight: | 10kg max |
Download Adobe Acrobat Specifications Page
